Picking the right Home Depot paver sealer can feel overwhelming when you’re staring at a wall of options, wet look, low gloss, penetrating, acrylic, each promising to be the one your driveway actually needs. Get it wrong, and you’re left with a sticky, peeling mess baking under the Florida sun.
At Florida Clean Roof, we’ve spent over 20 years cleaning and maintaining exterior surfaces across Southwest and Southeast Florida. Our hardscape pressure washing crews prep hundreds of driveways, patios, and pool decks every year, and we see firsthand what happens when homeowners seal with the wrong product, or skip sealing altogether. That hands-on experience gives us a strong opinion about what actually holds up in Florida’s heat and humidity.
Below, we break down five solid paver sealer options you can grab at Home Depot, covering wet look finishes, low gloss alternatives, and penetrating formulas so you can match the right product to your project.
1. Foundation Armor SX5000WB penetrating sealer
The Foundation Armor SX5000WB is a water-based penetrating sealer that soaks into the paver surface rather than sitting on top of it. This gives you long-lasting protection without adding a film coating that can peel, flake, or trap moisture underneath.
Best for
This sealer works best for concrete pavers, brick, and natural stone where you want protection without changing how the surface looks. If your priority is keeping your driveway clean and natural-looking while blocking water and stains, this is a strong pick among home depot paver sealer options.
Finish and curb appeal
The SX5000WB delivers a low sheen, natural-look finish that won’t make your driveway appear wet or plastic. You get a subtle enhancement to the paver color without the heavy gloss that some wet look sealers leave behind.
Water beading and breathability
Because the SX5000WB penetrates rather than coats, it allows moisture vapor to escape from below while still repelling water from above. This breathability prevents the bubbling and delamination issues that surface sealers develop in humid climates.
Breathable, penetrating sealers matter especially in Florida, where moisture trapped under a surface coating can cause more damage than leaving pavers bare.
Where it works best in Florida
Florida’s heat, humidity, and heavy rain cycles put serious stress on any surface coating. The SX5000WB handles that environment well because there is no film to crack or peel under UV exposure or thermal expansion.
Application basics for DIYers
Apply the SX5000WB with a low-pressure pump sprayer or roller on a clean, dry surface. One coat is typically sufficient, though high-porosity pavers may need a second pass after the first has fully absorbed.
Price range at Home Depot
Expect to pay around $60 to $80 per gallon, which covers roughly 100 to 200 square feet depending on paver porosity.
2. BEHR Premium wet look sealer 98505
The BEHR Premium wet look sealer 98505 is a water-based acrylic coating that sits on top of your pavers and delivers a glossy, saturated finish. It’s one of the more popular home depot paver sealer choices for homeowners who want visible, immediate results after application.
Best for
This sealer works best on concrete pavers and brick surfaces where you want a high-gloss, wet appearance. It suits patios and decorative walkways better than high-traffic driveways.
Finish and curb appeal
The 98505 gives you a deep, wet look finish that makes paver colors pop. If you want your patio to look freshly cleaned year-round, this film-forming coating delivers that effect immediately.
Durability on patios and driveways
On low-traffic surfaces like patios, the BEHR 98505 holds up reasonably well. High-traffic driveways wear through the coating faster, requiring reapplication every one to two years.
Hot tire pickup and peeling risks
Film-forming sealers like the 98505 are vulnerable to hot tire pickup, where a vehicle’s warm tires bond to the softened surface coating and pull it away.
Avoid using this sealer on driveways where vehicles park in direct Florida sun regularly.
Application basics for DIYers
Apply with a roller or pump sprayer on a clean, dry surface. Two thin coats produce better adhesion and longevity than one heavy application.
Price range at Home Depot
Expect to pay around $40 to $55 per gallon, covering roughly 200 square feet per gallon on standard concrete pavers.
3. Eagle wet look solvent-based acrylic sealer EPS5
The Eagle EPS5 is a solvent-based acrylic sealer that delivers one of the most aggressive wet look finishes you’ll find as a home depot paver sealer option. Solvent-based formulas bond more deeply into the surface than water-based alternatives.
Best for
This sealer works best on concrete pavers and clay brick where you want maximum gloss and bold color enhancement. It suits decorative patios and pool decks that see moderate foot traffic rather than heavy vehicle use.
Finish and curb appeal
The EPS5 produces a high-gloss, deep wet look that makes paver colors appear richer and more saturated than most water-based products can achieve. Color enhancement is immediate and visible from the first coat.
Solvent-based tradeoffs
Solvent-based formulas require better ventilation during application and emit stronger fumes than water-based sealers. Keep pets and children away from the work area until the surface fully cures.
Apply the EPS5 during cooler morning hours to reduce fume buildup and promote even drying across the surface.
UV and weather performance
The EPS5 handles Florida’s UV exposure better than standard water-based acrylics, but still needs reapplication every one to two years on surfaces in direct sun.
Application basics for DIYers
Apply with a low-pressure sprayer or roller in thin, even coats. Two coats produce better adhesion and longevity than a single heavy pass.
Price range at Home Depot
Expect to pay around $50 to $70 per gallon, covering roughly 150 to 200 square feet depending on paver porosity.
4. Glaze ‘N Seal paver sealer and sand stabilizer 154
The Glaze ‘N Seal 154 combines a surface sealer with a built-in sand stabilizer, making it a practical two-in-one choice among home depot paver sealer options for interlocking paver systems.
Best for
This product works best on interlocking concrete pavers with sand-filled joints on patios, walkways, and pool decks. It suits moderate-traffic surfaces where joint stability matters as much as surface protection.
What sand stabilization actually does
The stabilizer in this formula bonds the joint sand in place, reducing the washout that Florida’s heavy rain cycles cause over time. Without that stabilization, repeated downpours erode joint sand and leave your pavers loose and uneven.
Stabilized joints also cut down on weed growth, since packed sand gives seeds less room to take hold between your pavers.
Finish and slip resistance
The 154 delivers a low to medium gloss finish that enhances color without producing an aggressive wet look. The formula includes slip-resistant additives, which matter on pool decks and wet walkways.
Maintenance and re-sanding expectations
Expect to re-sand joints every two to three years depending on traffic and rainfall.
Application basics for DIYers
Apply with a low-pressure sprayer or roller on clean, dry pavers in two thin coats.
Price range at Home Depot
Expect to pay around $45 to $60 per gallon.
5. Ghostshield 8505 water and oil repellent sealer
The Ghostshield 8505 is a water-based silane-siloxane penetrating sealer built to repel both water and oil-based contaminants without leaving any visible coating on your surface.
Best for
This sealer works best on concrete pavers and natural stone where you want maximum stain resistance without any change to the surface appearance. It suits driveways and garage aprons that see regular vehicle traffic and frequent oil drips.
Natural look vs wet look results
The 8505 leaves a completely natural-look finish with no gloss or sheen. Your pavers look exactly the same after sealing, but with a strong, invisible barrier working below the surface to block contaminants.
Oil, grease, and driveway stains
Most sealers block water well but do little against oil. The 8505’s dual-repellent formula pushes oil and grease off the surface before they can penetrate and stain the paver below.
This makes the 8505 one of the more practical home depot paver sealer picks for driveways where vehicles park in direct sun regularly.
Salt and moisture performance
Florida’s coastal salt air and heavy rain cycles accelerate deterioration in untreated pavers. The 8505 blocks chloride intrusion, which reduces spalling and surface erosion over time.
Application basics for DIYers
Apply with a low-pressure pump sprayer on a clean, dry surface. Two thin coats produce better penetration than a single heavy application.
Price range at Home Depot
Expect to pay around $55 to $75 per gallon, covering roughly 150 to 200 square feet per gallon.
Next steps
Each home depot paver sealer on this list solves a different problem, so your best pick depends on what your surface actually needs. If you want invisible protection with no change to appearance, go with the Foundation Armor SX5000WB or Ghostshield 8505. If color enhancement and gloss matter more, the BEHR 98505 or Eagle EPS5 deliver that effect. For interlocking paver systems with sand joints, the Glaze ‘N Seal 154 handles both sealing and stabilization in one application.
Before you seal anything, your pavers need to be thoroughly cleaned and free of organic growth, oil stains, and loose debris. Sealing over dirty surfaces locks in stains and prevents proper bonding. If your driveways, pool decks, or walkways need a professional clean before you start, Florida Clean Roof’s hardscape pressure washing team can get your surfaces ready for sealing the right way.
